ALIBERICO FOOD PACKAGING, COMMITTED TO THE SDG

/in /von
GRUPO ALIBERICO is characterized by its permanent commitment to environmental sustainability, relying on waste management and recycling as the fundamental pillars of its operation. ALIBERICO FOOD PACKAGING is a clear example of the forefront of sustainable development. Its commitment to climate action (Sustainable Development Goal: SDG13) goes beyond regulatory standards.

Its policy is based on “ZERO WASTE”: nothing is missed; everything is transformed and returns into the circular economy.

Aluminium, as a raw material, has significant advantages over other materials. Its most significant difference is that it doesn’t matter how many times you have use it or how many has  it been reused, it does not lose any of its properties or quality in the recycling process.

As a fact to be taken into account, more than 75% of the aluminium produced in the last 100 years, is still using today.

At ALIBERICO FOOD PACKAGING all the aluminium that comes into the factory is from a first fusion. Most of it is used to manufacture various containers, adapted to our customers’ needs.

Once the aluminium is used, the surplus is collected by suction, pressed and transformed into packages. Finally, this waste is melted and reused for other sectors in the aluminum market with the purpose of being regained.

Recycling one ton of aluminium saves 4 tons of Bauxite, which means a reduction of 9 tons of CO2 emissions.

ALIBERICO FOOD PACKAGING, held by the highest quality standards, is at the forefront of technology, process quality and circular economy.

ALIBERICO FOOD PACKAGING is committed to responsible production and consumption (SDG12).

ALUCOIL, übertrifft die neuen Brandschutzanforderungen

/in /von
Am 28. Dezember 2019 trat in Spanien eine neue Bauordnung (CTE) in Kraft, die unter andrem die ökologische Nachhaltigkeit und Reduktion des Energieverbrauchs von Gebäuden nahezu Null stärker fördern soll. In engem Zusammenhang mit diesem Punkt wurden auch die Brandschutzanforderungen an Fassadenmaterialien je nach Gebäudehöhe erhöht um Brandfälle und -verbreitungen zu vermeiden.

Es wurden die Brandschutzanforderungen sowohl an Fassadenverkleidungs- als auch Fassadendämmungsmaterialien entsprechend der Höhe der Gebäude geändert:

(*) Mit Brandsperren in der Luftkammer alle 10 m oder 3 Stockwerke. Die Brandschutzsperren können ausdehnungsfähig sein (sie schließen nur im Brandfall), müssen aber mindestens eine E30 Klassifizierung erreichen.

(1) Wenn sie der Öffentlichkeit zugänglich sind. Wenn nicht, gelten die Anforderungen der oberen Stufe.

Die Verbundplatten larson®, larcore® und die Belche termolac® übertreffen die Anforderungen der neuen Bauordnung bei weitem. Die A2 und B Klassifizierung der Produkte übertrifft alle gesetzlich vorgeschriebenen Spezifikationen. Unabhängig von der Höhe der Gebäude sind unsere Platten die perfekte Lösung. TOP-Produkte für die neuen Herausforderungen der Architektur der Zukunft.

ALUCOIL engagiert sich stets für die Förderung der Industrie, Innovation, Umwelt und von nachhaltigen Städte und Gemeinden.

A safe bet, the importance of investing in R&D

/in /von

ALUCOAT‚s R+D department, is formed by an experimented professional team that has a wide professional career upon their shoulders and a vast knowledge of the market, invests great efforts in the development of new products, as well as in the continuous improvement of already existing, trying to provide customized solutions to satisfy the needs of the most demanding customers.

The department’s work in developing new products becomes even more relevant in a market like the current one, which is constantly moving and requires quick and intelligent adaptation.

Thanks to the use of the most advanced technologies and laboratory facilities and the customisation of product specifications, ALUCOAT’s R&D department is one of its strengths, being able to provide tailor-made solutions in the most complex scenarios.

ALUCOAT, investing in industry and innovation.

One more year, the students of VTC IES Biello Aragon visit IBERFOIL

/in /von

On February 11th, the students of Electrical and Robotics Vocational Training Courses (VTC), together with two teachers, visited the IBERFOIL facilities in Sabiñánigo (Huesca).

During the tour they could see the inside of the facilities. The technicians informed them about the electricity, electronics and high-tech automatisms that the factory has. They could also see the new Edelweiss Rolling Mill working at full capacity and they could checked how the working reality in the world of aluminium is, being able to put into practice the knowledge acquired and seeing the instruments and machinery that is at the leading edge in rolling mill roughing.

This visit was the perfect way for them to get in touch with the professional world that awaits them, in IBERFOIL, they will find a future according to their professional qualities.

This action supposes the approach between specialized students and the labor needs of IBERFOIL, leader in the sector of thin and thick rolling mill.

IBERFOIL, is always supporting the society, that is why we are committed to education and quality work.

AUPA MIRANDÉS! ALUCOIL with Miranda and its football club

/in /von

A new milestone on its history. 

ALUCOIL keeps supporting sports and investing in Miranda de Ebro. Last Thursday, Club Deportivo Mirandes added a new milestone on its long history. For 2nd time ever reached semifinals at Copa del Rey (Spanish Cup), beating with lots of energy and effort some of Spain strongest rivals such as Celta, Sevilla or Villareal.

Club Deportivo Mirandes has become the only 2nd division team reaching semifinals in last 15 years, proving again that effort, illusion and commitment have its reward. After the drawing results, next game will take place on February 20th against Real Sociedad. ALUCOIL would like to send all its support and energy to keep making history and reach the final.

ALUCOIL, proud sponsor, will keep supporting sports and Club Deportivo Mirandes.

¡Aúpa Mirandés!

Alucoat® CS, and enjoy a good coffee

/in /von

Our coated aluminum, Alucoat® CS, is the most comfortable, quick and clean way to consume freshly brewed coffee.

Alucoat® CS is the best solution for the production of coffee capsules. The coated aluminum that we produce in ALUCOAT is the best barrier that avoid coffee oxidation and conserve all its natural properties without altering its flavour. Thanks to the wide range of colors we offer, it allows to differentiate the product based on the kind of coffee.

Using alloys that have been specially designed for this, with extraordinary drawing  properties, the capsules produced with Alucoat® CS offers a good mechanical protection and light weight, which saves storage and transport.

Moreover, in combination with Linfoil® for the capsule lid, with a wide range of heat-sealing coatings, ALUCOAT guarantees total protection of coffee and assure a correct breakage of the lid after the infusion of coffee inside preventing the coffee grounds from entering the cup.

Alucoat® CS is the best solution for the production of coffee capsules, it is 100% recyclable and environmentally sustainable.

ALUCOAT, always at the forefront and providing innovative solutions.

aluNID®, floors with honeycomb

/in /von

aluNID®, the best honeycomb core for floor.

The aluNID® high quality aluminum honeycomb, thanks to its lightness and non-combustibility, is ideal for floors which require high performance. Provided to the largest manufacturers in the naval, railway or elevator industry, the aluNID® honeycomb core is perfect to reduce weight, always according to the most demanding European standards for its high strength and durability. In addition, they provide high stability to support heavy weights due to their excellent strength.

With the use of aluNID®, you improve the security, always complying with the maximum requirements.

In aluNID® we always take a step forward by providing innovative solutions, quality and safety to our customers.

IBERFOIL advances with its investments

/in /von

In 2017 IBERFOIL installed the biggest and most modern cold rolling mill in order to triple its production capacity.

Currently, a new investment is being made in order to increase the quality and diversify its range of products. Several old buildings have been demolished and all the new facilities are already being completed to accommodate the new production line that will be operational in April.

The new facilities have more than 4,500m2, where a new production line for tension levelling will be placed. It will continue increasing the quality and range of products due to penetrate new markets, especially those sectors which have delicate aluminium thicknesses.

IBERFOIL, looking to the future, always in continuous growth.

Opening of the new ALIBERICO offices

/in /von

Yesterday, Thursday 23rd January, the new offices of the ALIBERICO GROUP headquarters, from where the planning and management control of all the factories are carried out, were inaugurated. The new offices located in Madrid, more modern and sustainable, shows ALIBERICO’s new image and reflects its commitment to the welfare of people and respect for the environment.

The event was inaugurated by its President Clemente González Soler and was attended by the Mayor of Madrid, Mr. José Luis Martínez-Almeida, the Regional Counsellor of Economy, Employment and Competitiveness of the Community of Madrid, Mr. Manuel Giménez, and the prestigious and renowned architect Mr. Julio Touza, as well as employees, suppliers and close friends.

The remodelling project has been possible thanks to the commendable work of the team of the Touza Arquitectos studio, who have designed and coordinated the entire project from its initial design phase to its final execution. It is worth mentioning especially their involvement in the project and professionalism, taking care of every detail.

In the same way, we would like to thank Estudio44 for the execution of the works and Gerflor for supplying the elegant flooring for the offices

ALIBERICO GROUP MOVES ALUCOIL SYSTEMS ACTIVITY TO NEW FACILITIES AT MIRANDA DE EBRO

/in /von

ALIBERICO has moved its sister company ALUCOIL SYSTEMS activities, this division, focused in advanced materials manufacturing for industry and transport sectors has changed its location to the new plant acquired from Gamesa a few months ago at Bayas Industrial Park, at Miranda de Ebro (Burgos).

These new facilities are two times bigger than previous factory. Now 8.000 sqm. are available, which will allow the company keep growing in systems and Aluminium solutions market with a new generation of materials.

This company is specialized in advanced materials manufacturing both for mass transport (trains, ships and buses) and for industry (elevators, machinery fairing, airport fingers).

Futhermore, ALUCOIL SYSTEMS has changed its name to ALINTRA SYSTEMS. This new name is directly linked to transport and industry markets the company is focused on, getting closer to the company market strategy and to the material range produced by the company.

ALIBERICO is studying the possibility of adding a new line of exclusive materials worlwide at the previous Alucoil Systems facility, also in Bayas Industrial Park.

ALIBERICO has now 3 factories at Miranda de Ebro, all of them at Bayas Industrial Park. In 1995, at this same location, Alucoil was created, a multinational company specialized in composite panels manufacturing with high tech value.

At this moment, ALIBERICO is in the middle of an ambitious plan focused in the growth of most of its factories in Spain, mainly ALUCOAT (Linares, Jaen), IBERFOIL (Sabiñanigo, Huesca) and REDBOND (Alicante).